Mi Swaco Products

MI Swaco

logo

SUPER PLUG

Additive

Proprietary hole-abandonment additive   SUPER PLUG additive is a proprietary blend of bentonite, hydroxides, and silicates designed to minimize environmental impacts in hole‐abandonment applications. SUPER PLUG is a 100% inorganic additive that  offers superior sealing characteristics where low‐permeability, flexible seals are required. SUPER PLUG additive can be used to plug and abandon any type of […]

Learn More
logo

SMOOTH GROUT THERMAL

Grouting

Bentonite thermally conductive grout   SMOOTH GROUT THERMAL high-solids bentonite is specially blended and can be mixed with sand in a two-part, thermally conductive grouting material.SMOOTH GROUT THERMAL additive can be mixed to meet a range of thermal conductivity from 0.45 to 1.0 Btu/hr-ft-°F. Applications SMOOTH GROUT THERMAL was developed specifically as a thermally conductive […]

Learn More
logo

SMOOTH GROUT 30

Grouting

Bentonite composition for use as a sealant, plugging agent   SMOOTH GROUT 30 bentonite‐grouting composition is easy to use and contains high‐swelling, sodium montmorillonite clay. It is designed for use in water wells and monitoring wells, for sealing the annular space around the well casing, and for plugging drilled holes and abandoned wells. SMOOTH GROUT […]

Learn More
logo

SMOOTH GROUT 20

Grouting

Easy-to-use bentonite grouting slurry   SMOOTH GROUT 20 slurry is an easy‐to‐use bentonite‐grouting composition containing high‐swelling sodium montmorillonite clay. It is designed for use in water wells and monitoring wells, for sealing the annular space around a well casing, and for plugging drilled holes and abandoned wells. SMOOTH GROUT 20 slurry contains no organic additives […]

Learn More
logo

RINGFREE

MI Swaco

NSF-certified thermally stable thinner   RINGFREE is a highly effective and thermally stable thinner and surface-active agent used to remove bentonite clays from the drill string. RINGFREE is used primarily to prevent bit balling and mud rings, but also is effective in reducing the viscosity and gel strengths of freshwater drilling fluids. RINGFREE is certified […]

Learn More
logo

POLYPAC UL

Copolymer

High-quality PAC fluid loss control polymer   POLYPAC  UL polyanionic cellulose (PAC) is a high‐quality, water‐soluble polymer designed to control fluid loss. Since it is an “ultra‐low” (UL) additive, POLYPAC  UL causes a minimal increase in viscosity in water‐base muds. Applications POLYPAC UL additive controls fluid loss in freshwater, seawater, KCl and salt muds. It […]

Learn More
logo

POLYPAC R

Copolymer

POLYPAC R polyanionic cellulose is a high‐quality, water‐soluble polymer designed to control fluid‐loss and increase viscosity in water‐base muds. This protective polymer “envelope” inhibits the dispersion of shale cuttings and restricts fluid interactions with exposed shales. POLYPAC R additive controls fluid‐loss in freshwater, seawater, KCl, and salt muds. It forms a thin, resilient, low‐permeability filtercake […]

Learn More
logo

POLYPAC R

Copolymer

POLYPAC R polyanionic cellulose is a high‐quality, water‐soluble polymer designed to control fluid‐loss and increase viscosity in water‐base muds. This protective polymer “envelope” inhibits the dispersion of shale cuttings and restricts fluid interactions with exposed shales. POLYPAC R additive controls fluid‐loss in freshwater, seawater, KCl, and salt muds. It forms a thin, resilient, low‐permeability filtercake […]

Learn More
logo

POLY-PLUS RD

Copolymer

Multi-function PHPA additive for water-based muds   POLY‐PLUS RD acrylic copolymer (PHPA) is a readily dispersible additive designed to provide cuttings encapsulation and shale stabilization in freshwater to saltwater drilling fluids ranging from low solids to weighted muds. POLY-PLUS RD is formulated for easy mixing with improved dispersion to eliminate “fish eyes,” which occurs when […]

Learn More
logo

POLY‐PLUS LV

Copolymer

Low-viscosity clay inhibiting agent   POLY‐PLUS LV acrylic copolymer is a low‐molecular‐weight, medium‐charge acrylic copolymer designed to provide cuttings encapsulation and clay‐dispersion inhibition. It is designed for use in fresh and saltwater drilling fluids. POLY‐PLUS LV provides minimal viscosity contribution and can enhance filtration properties. When added to MAX GEL viscosifier or MAX BORE HDD […]

Learn More
logo

POLY-PLUS

Copolymer

For optimum shale stabilization   The POLY-PLUS polymer-based PHPA system is designed specifically for improved cuttings encapsulation and shale stabilization. Features Excellent shale encapsulation Low cuttings dispersion Low solids content Low coefficient of friction Low toxicity Benefits High ROP Good solids control Reduced torque and drag Good cement jobs Minimized drilling problems Reduced costs Product […]

Learn More
logo

PLATINUM PAC UL

MI Swaco

Fluid-loss control polymer for water-based muds   PLATINUM PAC UL polyanionic cellulose (PAC) is a high‐quality, water‐soluble polymer designed to control fluid loss in water-based drilling fluids. Because it is an “ultra‐low” (UL) additive, it causes a minimal increase in viscosity and is readily dispersible in a wide range of water‐base mud systems. PLATINUM PAC […]

Learn More
Page 1 of 612345...Last »